CANWELL MEDICAL
Leading The Way To A Healthy World
Detailed Photos
Product Description
| Description |
Qty. |
Description |
Qty. |
| Guide Wire Ø2.5, With Threaded Tip |
2 |
Counter Sink |
1 |
| Wrench Hexagon |
1 |
Screwdriver with holding for Multi Locking Screw |
1 |
| Quick Coupling Handle |
1 |
Drill Sleeve for Multi Locking Screw |
2 |
| Extension Bar |
1 |
Drill Guide for Multi Locking Screw |
2 |
| Impactor hammer |
1 |
Screwdriver for 4.0mm locking screw, SW3.5 |
1 |
| Guide Wire, φ2.5 |
4 |
Depth Gauge with Hook |
1 |
| Awl, φ10.0 |
1 |
Protection Sleeve φ12.0 |
2 |
| Awl, φ11.5 |
1 |
Obturator φ8.0 |
2 |
| Drill Guide |
1 |
Trocar φ3.2 |
2 |
| Insertion Handle |
1 |
Drill Bit φ3.2 |
2 |
| Fast Bolt |
1 |
Extractor |
1 |
| Targeting Arm(main) |
1 |
Ruler |
1 |
| Targeting Arm (lateral) |
1 |
Retractor |
1 |
| Connection Nut(main) |
1 |
Screwdriver Shaft for 3.5mm locking screw, T15 |
1 |
| Connection Nut(lateral) |
1 |
Screwdriver for Multi Locking Screw |
1 |
| Protection Sleeve, φ13.0 |
2 |
Screwdriver Shaft for 4.0mm locking screw, SW3.5 |
1 |
| Obturator, φ10.0 |
2 |
Drill Stop φ2.8 |
1 |
| Trocar, φ3.8 |
2 |
Drill Stop φ3.2 |
1 |
| Drill Bit, φ3.8 |
2 |
Drill Bit φ2.8 |
2 |
| Torque Limiter , 1.5N*m |
1 |
Instrument Tray |
1 |
| Depth Gauge for Multi Locking Screw |
1 |
Total amount |
1 |
| |
|
|
|
| Description |
Qty. |
Description |
Qty. |
| Compression shaft/pin |
1 |
Distal targeter |
1 |
| Location shaft |
1 |
Distal targeter, Lateral |
1 |
| Guide wire 2.5 |
1 |
Instrument Tray |
1 |
| Reamer 8.0 |
1 |
Total amount |
1 |
| |
|
|
|
Certifications
Company Profile
CANWELL Medical
A medical device company founded in 1994 is now one of China's largest designers, manufacturers, and suppliers of orthopedic implants and instruments. We have over 60,000 square meters of workshop. We are a long-term instrument contract manufacturer of USA top orthopedic companies. Our Canwell own brand product lines include traumatology, spinal fixation system, and surgical instrument, covering products such as femoral nails, titanium plates, and screws, pedicle screws with rods, PEEK cages, balloon kyphoplasty for spine fracture, and other instrument sets, already sell in China, Europe, Latin America, the Middle East, and Asia...
FAQ
Q: Would you please give some information on shipping mode and charges?
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE ?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have a CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller sample orders in the beginning in order to test market our products. Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for the listed products, or they are newly produced?
A: Generally, we have stock for every listed product, which is produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.
Audited Supplier 
){kind=link}